Fluid Management H-5 Mixer Digital Timer - Manual (Page 21)

SERVICING AND REPAIR
H-5 Paint Mixer Operating & Instruction Manual 21
SERVICING
AND REPAIR GENERAL INFORMATION
If you do not feel confident about disassembling the paint mixer or replacing
a part, DO NOT ATTEMPT THE PROCEDURE. Should problems or
questions arise, contact Customer Service at Fluid Management.
Carefully read all of the instructions before you begin. For component
identification and location, refer to the Parts Section of this manual.
SAFETY PROCEDURE
Warning
Caution
Always shut off the POWER switch and
unplug the mixer before servicing.
WARNING: ELECTRICAL HAZARD
Wear your safety glasses to prevent
possible injury.
CAUTION: