ARB RD74 - Manual (Page 23)

3 Installing the Air Locker
21
3.10 Reinstalling Differential and Axles
Replace the paper gasket on the axle housing flange.
Reinstall the third member to the differential housing according to
your vehicle service manual.
Reinstall the drive shaft.
Replace the axle seals if necessary and fit to the axles.
Insert both axles fully into the housing, engaging splines, and then
gently tap them inward.
NOTE : Be careful not to damage the axle shaft oil seals when
installing the axle. Support the axle’s entire weight
where possible.
Torque down the axle bolts to manufactures specifications.