ARB 3438320 - Manual (Page 17)

Last Rev Date: 17/11/2009 Page 17 of 18 Fitting instructions# 3787059
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
BULL BAR FITMENT TO VEHICLE
69. Push the outer edge of the liner forward
past the wing return edge so that it snaps in
against the wing brace as shown.
ONCE BAR IS FITTED:
♦ Ensure all bolts are tensioned correctly
♦ All wiring is clear of sharp edges or moving surfaces and secured
properly
♦ Piping is secured well away from sharp or moving components
♦ Check operation of winch if fitted
♦ Check all wiring and turn signal lamps are functioning correctly