ARB 3438320 - Manual (Page 8)

Last Rev Date: 17/11/2009 Page 8 of 18 Fitting instructions# 3787059
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
PREPARATION TO VEHICLE
25. Pull up pipe and refit bracket as shown
26. The bumper reinforcement beam is now
visible.
27. Remove the four bolts that hold the factory
steel sump guard, set aside to be fitted once
bull bar is fitted.
28. The four bolts that hold the bumper
reinforcement beam can now be removed
and set aside.
29. Remove tow hook and set aside. Hook will
be reused as well as bolt set