ARB 3938020 - Manual (Page 6)

02/12/04 Page 6 of 12 3782865
ASSEMBLY SEQUENCE FOR WINCH BUMPER.
10. 1. Bolt the winch and roller fair lead to the bar
using the bolts supplied. The longer bolts are
used for the two bottom holes through the roller
fair lead.
11. 1. If fitting the XP 9.5 winch, remove the cover from
the control box.
For any other winch, go to step 17.
12. 1. Remove the two cap screws, nuts and spacer
washers that hold the four solenoids in place.