L.B. White FA-MCS - Manual (Page 6)

Sensor Location
Each SmartBox
™
controls two zones of heat, two heaters
per zone . One SmartBox
™
sensor may be used for each
zone of heat. however two sensors are used for optimum
temperature management..
Use only the L.B.White SmartBox
™
sensors provided with
the SmartBox
™
, or order replacements as needed. Do
not use sensors from other controller systems as these
are not compatible with the L.B.White SmartBox
™
.
See below for proper SmartBox
™
sensor location.
FANS
ENVIRONMENT
CONTROLLER L.B. WHITE
SmartBox
™
ENABLE
CONTROL SIGNAL
TO GAS VALVE
115 VAC TO HEATER
115 VAC
INCOMING
POWER
SmartBox™ SENSORS
EXISTING ROOM
SENSORS
GUARDIAN
HEATER(S) WITH
Smart Sense
™
GUARDIAN WITH Smart Sense
™
FIG. 5
SmartBox™ SENSORS
SmartBox ™ SENSORS ARE LOCATED WITHIN 6 IN. OF EXISTING ROOM SENSORS, AND AT THE SAME HEIGHT.
6
* *
*
SOLDER AND WRAP WITH
ELECTRICAL TAPE THE CONNECTION
BETWEEN THE SmartBox
™
SENSOR
AND THE 2 WIRE CONDUCTOR LEADING
BACK TO THE SmartBox ™