L.B. White 125-210K Tradesman - Manual (Page 12)

OPERATION (cont.)
LONG-TERM STORAGE OF YOUR HEATER
FUEL TANK DRAIN CP045DK & CP075DK
1. Drain fuel tank through fuel cap opening.
2. Using a small amount of kerosene, swirl and rinse the
inside of the tank.
NEVER MIX WATER WITH KEROSENE, as it will cause rust
inside the tank. Pour the kerosene out, making sure that
you remove it all.
IMPORTANT: Do not store kerosene over summer for use
during next heating season. Using old fuel may damage
heater.
3. Reinstall fuel cap. Properly dispose of old and
dirty fuel.
- Make sure storage place is free of dust and corrosive
fumes.
- Store the heater in the original box with the original
packing material and keep USER’S MANUAL with
heater.
FUEL TANK DRAIN CP125EK & CP175EK & CP210EK
1. Remove drain bolt from bottom of fuel tank . See
Figure 9.
IMPORTANT: Do not store kerosene over summer for use
during next heating season. Using old fuel may damage
heater.
3. Tighten drain bolt firmly into the tank, otherwise it will
not seal completely.
- Make sure storage place is free of dust and corrosive
fumes.
- Store the heater in the original box with the original
packing material and keep USER’S MANUAL with heater.
Figure 9 – Drain Plug Removal
Seal
Fuel Drain Bolt
Fuel Drain Bolt
Seal
1. Using a small amount of kerosene, swirl and rinse the
inside of the tank.
NEVER MIX WATER WITH KEROSENE, as it will cause rust
inside the tank. Pour the kerosene out, making sure that
you remove it all.
11