L.B. White 125-210K Tradesman - Manual (Page 18)

MAINTENANCE (cont.)
REPLACING FUSE
NOTE: The heater is fuse protected. If your heater fails to ignite, DO NOT
RETURN YOUR HEATER TO THE STORE.
Please follow the simple instructions below to inspect and change the fuse.
- Unplug heater.
- Remove side cover screws using medium Phillips screwdriver.
- Remove fuse from fuse holder (See Figure 23).
- Replace fuse with enclosed fuse.
- Replace switch wires to power switch.
- Replace side cover.
NOTE:
WARNING
Burn hazard!
•SHOCK HAZARD. To prevent presonal injury, unplug the
power cord before replacing fuse.
Fuse Holder
Fuse
Model : CP075DK
Model : CP045DK
Switch
Screw
Wires
Switch
Side Cover
Power
Fuse
Fuse Holder
Fuse
Fuse Holder
Figure 23 – Replacing Fuse
17