L.B. White 350 Premier Dual Fuel - Manual (Page 11)

11
CLAMP
DUCT ADAPTER
TABS
DIFFUSER
B. AAttaching EEnd D Diffuser tto EExtendable D Duct
Accessory 23054
1. Loosen screw on duct clamp so clamp is easily
positioned over ribs at end of flexible duct.
2. Slide duct adapter into duct end. Duct adapter tabs
must be facing away from duct and are located at 3,
9 and 12 o’clock positions. See Fig. 6.
3. Tighten screw clamp so adapter is held securely
within duct.
4. Insert tabs of adapter into slots on air diffuser back.
5. Push down on adapter so tabs are seated firmly to air
diffuser.
6. Locate diffuser under side wall. See Fig. 7.
FIG. 6
FIG. 7
TENT SIDE WALL
TENT DRAPED
WITHIN DIFFUSER
CHANNEL
OPTIONAL AIR DIFFUSER
MATERIAL DRAPED
WITHIN DIFFUSER
CHANNEL