Brady TLS 2200 - Manual (Page 54)

46 TLS2200
T M
Thermal Transfer Printer User’s Guide
8. Press <Enter> or <Print>. The printer begins printing two each of the five
wiremarkers listed above.
T5: Creating a Label with Rotated Text, Printing Multiple Copies
Note: This example assumes you have marker roll PTL-19-423 loaded in your
printer.
Label to be printed:
ROTATE
TEXT
Setup Status:
H Justify Center
V Justify Center
Rotation 0 Degrees
Format Component
1.
Check the Status Bar to make sure the unit is in Component mode. If not, press
<Shift> + <Wire> to toggle from Wiremarker mode to Component mode.
2. Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the
default size of 9.
3. Press <Func> + <Setup> to access the Setup Menu.
4. Press <
?
> three times to move to the Style sub-menu, then press <Enter>.
5. With the cursor highlighted on Rotation, press <Enter>.
6. Press the <
>
> key once to select 90 Degrees.
7. Press <Enter>.
8. Press <Func> + <Exit> to exit back to the text editor screen.
9. Press <Shift> + <
>
> once to increase the font size to 10.
10. Enter ROTATE on line one, then press <Enter>.