Brady TLS 2200 - Manual (Page 60)

52 TLS2200
T M
Thermal Transfer Printer User’s Guide
T8: Creating a Terminal Block Label
Note: This example assumes you have the terminal block marker roll PTLTB-400-
375 loaded in your printer.
Label to be printed:
101
102
103
104
105
106
107
108
109
110
Setup Status:
H Justify Center
V Justify Center
Rotation 0 Degrees
Format Component
Legend Type Text
1.
Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the
default value of 6.
2. Press <Func> + <Setup> to access the Setup Menu.
3. Press the <
?
> key six times to select Units, then press <Enter>.
4. Press the <
>
> or <
?
> keys to toggle the Units to Metric, then press <Enter>.
5. Press the <
>
> key four times to select Continuous, then press <Enter>.
6. With the cursor highlighted on Terminal Block, press <Enter>.
7. Use the <
>
> and <
?
> keys as needed to set the terminal block repeat value to 6 mm
(.23622 in.), then press <Enter>.