Brady TLS 2200 - Manual (Page 56)

48 TLS2200
T M
Thermal Transfer Printer User’s Guide
T6: Creating a Barcode Label
Note: This example assumes you have marker roll PTL-19-423 loaded in your
printer.
Label to be printed:
BRADY
A101
A101
Setup Status:
H Justify Center
V Justify Center
Rotation 0 Degrees
Format Component
Legend Type Text
1. Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the
default value of 9.
2. Press <Func> + <Setup> to access the Setup Menu.
3. Press <
?
> three times to move to the Style sub-menu, then press <Enter>.
4. With the cursor highlighted on Rotation, press <Enter>.
5. Press the <
?
> key once to select 0 Degrees.
6. Press <Enter>.
7. Press <Delete> to return to the Setup Menu.
8. Press the <
>
> key twice to select Barcode, then press <Enter>.
9. With the cursor highlighted on Bar Height, press <Enter>.
10. Use the <
>
> and <
?
> keys as needed to set the height of your barcode to 8mm
(0.31496 in.), then press <Enter>.
11. Press the <
?
> key once to select Human Readable, then press <Enter>.
12. Press the <
>
> or <
?
> keys to toggle the human readable text ON, then press
<Enter>.