Brady TLS 2200 User Manual
Page 64
56
TLS2200
T M
Thermal Transfer Printer User’s Guide
T10: Creating a Continuous Label
Note: This example assumes you have the continuous marker roll PTL-8-422
loaded in your printer.
Print the following label to be used to identify communications equipment:
Setup Status:
H Justify
Left
V Justify
Center
Rotation
0 Degrees
Format
Component
Legend Type
Text
1.
Press <Shift> + <Form Clear> to delete all lines of text and reset
the font to the default value of 14.
2.
Press <Func> + <Setup> to access the Setup Menu.
3.
Press the <
?
> key three times to select Style, then press <Enter>.
4.
Press the <
?
> key once to select H Justify, then press <Enter>.
5.
Press the <
>
> or <
?
> keys to select Left, then press <Enter>.
6.
Press the <Delete> button to exit back to the Setup Menu.
7.
Press the <
>
> key once to select Continuous, then press <Enter>.
8.
Press the <
?
> key once to select Banner, then press <Enter>.
9.
Press the <
>
> or <
?
> keys to toggle the direction to Horizontal,
then press <Enter>.
10. Press <Func> + <Exit> to exit back to the Text Editor screen.
11. Enter BX1.10H2CC 10 Base T HUB TO 2ND FLOOR CALL
CENTER on line one.
12. Press <Print>.