Brady TLS 2200 User Manual
Page 65
TLS2200
T M
Thermal Transfer Printer User’s Guide
57
T11: Creating a Banner Label of Fixed Length
Note: This example assumes you have the banner marker roll PTL-43-439OR
loaded in your printer.
Print the following label to be used to identify an electrical conduit:
Setup Status:
H Justify
Center
V Justify
Center
Rotation
0 Degrees
Format
Component
Legend Type
Text
1.
Press <Shift> + <Form Clear> to
delete all lines of text and reset the font
to the default value of 19.
2.
Press <Func> + <Setup> to access the
Setup Menu.
3.
Press the <
?
> key six times to select
Units, then press <Enter>.
4.
Press the <
>
> or <
?
> keys to toggle the
Units to Metric, then press <Enter>.
5.
Press the <
>
> key four times to select
Continuous, then press <Enter>.
6.
Press the <
?
> key once to select Fixed
Length, then press <Enter>.
7.
Use the <
>
> and <
?
> keys as needed to
set the fixed length repeat value to
143.000mm (5.62992 inches), then
press <Enter>.
8.
Press <Func> + <Exit> to exit back to
the Text Editor screen.
9.
Enter 220 VOLTS on line one.