5 stereo operation plus 2 subwoofers – Behringer UltraDrive Pro DCX2496 User Manual

Page 22

Advertising
background image

22

ULTRADRIVE PRO DCX2496 User Manual

6.5 Stereo operation plus 2 subwoofers

Output 5 + 6 usable as additional mono delay line outputs.

XENYX X2222USB Mixing console

Left

In A

Out 1 2

3

4

(5 and 6 not used)

EUROPOWER EP2000

Stereo power amplifier

EUROLIVE

B1220 PRO

Left passive

loudspeaker

Right passive

loudspeaker

In B

Stereo output

Right

High (2)

High (4)

EUROLIVE B1800X PRO

Left active subwoofer

Right passive subwoofer

Low (3)

Low (1)

Fig. 6.5: Stereo operation plus 2 woofer cabinets

Only two frequency ranges (Low and High) are used on each stereo side. The two passive speaker cabinets for the higher frequencies are limited towards the bass end

and are fine-tuned in their sound with the DCX’s internal equalizer. The stereo bass signal is first sent to the active woofer, which also provides the passive woofer

cabinet with sufficient power for the right-hand low-frequency channel. The unused outputs 5 and 6 can be used as mono delay lines.

Advertising