Behringer UltraDrive Pro DCX2496 - Manual (Page 24)

24 ULTRADRIVE PRO DCX2496 User Manual
6.7 Mono 6-zone distribution mode
XENYX X2222USB Mixing console
Mono master
output
In A
Outputs: 1
(Sub) (Mid) (Low
Mid)
(Low)
(1)
Left
EUROLIVE B1520 PRO
Right Left Right Left Right
(2) (3) (4) (5) (6)
2 3 4 5 6
Identical full range mono output signals
(High mid)
(High)
EUROPOWER EP2000
Stereo power amplifier
Fig. 6.7: Mono 6-way “Zoning” (signal distribution mode)
In this special-purpose application, the ULTRADRIVE PRO is not used as a frequency crossover but rather as a signal distributor, for dedicated EQing plus individual
delays and separate volume settings for each output. The monophonic mix signal is split up and sent to six equal outputs. It can be used for a variety of applications
requiring the transmission of music or speech over large distances or to several rooms or rooms consisting of several compartments. Examples are large discotheques,
multi-room clubs/pubs/bars, shopping malls, restaurants, hotels, lobbies, trade show and conference halls, railway stations, churches/cathedrals and even at home
where you can use the DXC2496 to play back music in every room.