Behringer UltraDrive Pro DCX2496 - Manual (Page 26)

26 ULTRADRIVE PRO DCX2496 User Manual
6.9 3.0 Channel surround
XENYX X2222USB Mixing console
Left
Mono surround channel Out 5/6 identic
In A
Outputs: 1 2 3 4 5 6
In B In C In C Signal
2x mono surround
Stereo high frequencies
Stereo low frequencies
EUROPOWER EP2000
Stereo power amplifier
Low Full range (mono)
EUROLIVE B1220 PRO
High
High
High
Low Left (1)
Right (3)
Low
Left (2)
Right (4)
Left (5)
Right (6)
Stereo sub master
Right
Surround rear
Surround front
Fig. 6.9: Surround 3.0
With this 3-channel configuration your audience experiences a live surround sound that comes close to the popular “Dolby Surround” sound format. The 2-way front
speakers carry the main stereo signal from inputs A+B. A separate mono surround signal is supplied via In C, which is reproduced by two rear (or side) full-range
speakers. The surround signal can be a delayed signal derived from the stereo sum signal, it can be processed with reverb or any other effect, or it can even provide a
separate sound. Using this configuration, your surround music performances, slide shows, silent-movies or video shows will be a real experience—the sound of ocean
waves lapping onto the shore or space ships flying through outer space—all embedded into “atmo” sounds floating around the room.