Enlarge (temporary setting), Copy mode (temporary setting) – Brother DCP1200 User Manual
Page 37
M A K I N G C O P I E S
3 - 5
Enlarge (Temporary Setting)
1
Place the original(s) in the ADF or on the scanner glass.
2
Press
Enlarge
repeatedly until you
Ratio
Contrast
R E A D Y C O P Y / S C A N
1 4 1 %
see the enlargement ratio you want:
100%,120%, 125%, 141%, 150%,
200%, 400%, ZOOM
—OR— Select ZOOM to use
the numenric keys to enter any
percentage between 101% and 400%.
3
Using the numeric keys, enter the number of copies.
4
Press
Copy
.
Copy Mode (Temporary Setting)
Press
Copy Mode
repeatedly until the LED is
illuminated for Auto, Text or Photo, as needed.
The factory default setting is Auto.
Auto — Select when the original includes
both text and photographs.
Text — Select when the original contains
only text.
Photo — Select when the original is a
picture.
Copying a Photograph
1
Insert the photo in the ADF or on the scanner glass.
2
Press
Copy Mode
until the Photo LED is illuminated.
3
Using the numeric keys, enter the number of
copies you want (up to 99).
4
Press
Copy
.