Brother DCP1200 - Manual (Page 73)

5 - 15 P R I N T I N G
Page Setup Section
Item Default What This Item Does
Left Margin *2 Sets the Left Margin value (0-145)
columns.
Right Margin *2 Sets the Right Margin value (0-155)
columns.
Top Margin 0.5" or 0.33" Sets the Top Margin 0", 0.33", 0.5", 1",
1.5” or 2".
Bottom Margin 0.5" or 0.33" Sets the Bottom Margin 0", 0.33", 0.5",
1", 1.5" or 2".
Line / Page *2 Sets the lines/pages (5-128).
Xoffset 0 Sets the Xoffset (vertical) value from
-500 to 500 dots. *2
Yoffset 0 Sets the Yoffset (horizontal) value from
0 to 500 dots.
*1 These values (except Yoffset and Xoffset) are overidden by settings
within your application software.
*2 These values depend on the paper size settings.
Font Configuration
Item Default What This Item Does
Font Source Internal “Internal”
Font name Brogham10 Selects a font from any of the printer’s
internal fonts (Brougham 10, 12 and
Letter Gothic16.66).
Pitch 10 Selects the font size of the selected font.
If you selected the Brougham or
LetterGothic font, Pitch is shown in the
selection box.
Symbol Set PC8 Selects the symbol set.
Other Configuration
Item Default What This Item Does
Auto LF Off Selects Auto LF “On or Off”
Auto CR Off Selects Auto CR “On or Off”
Auto Wrap Off Selects Auto Wrap “On or Off”
Auto Skip On Selects Auto Skip “On or Off”