Apple Newton Connection Utilities (for Macintosh) - Manual (Page 4)

3 Plug the other end of the serial cable into the printer port (
[
), the modem port (
W
), or
the printer-modem port on your computer.
IMPORTANT If you connect your Newton device to a PowerBook that has an
internal modem, make sure AppleTalk is inactive and Modem is set to
Normal in the PowerBook Setup control panel.
That’s it! Go on to “Installing the Newton Connection Utilities,” later in
this chapter.
Connect to an Apple
MessagePad or other
Newton device. If you use the printer port,
go to the Chooser and
make sure AppleTalk
is inactive.
[ W
4 Chapter 1