Apple Newton Connection Utilities (for Macintosh) - Manual (Page 6)

5 Make sure AppleTalk is active.
If not, click the AppleTalk Active button. If instructions appear on screen,
follow them.
That’s it! You’ve connected your Newton device to your computer on a
AppleTalk network. Go on to the next section.
Installing the Newton Connection Utilities
Before your computer can communicate with your Newton device, you need to
install the Newton Connection Utilities on your computer. Follow these steps:
1 Insert the Install 1 disk for the Newton Connection Utilities into a floppy disk drive (or, if
you have an eMate 300, insert the CD that came with it into your CD-ROM drive) and open
the disk by double-clicking its icon.
2 Open the Installer by double-clicking its icon.
If the software is on a CD, you may have to navigate to find it.
3 In the Installer Welcome dialog box that appears, click Continue.
6 Chapter 1
Make sure AppleTalk
is active.