Apple Newton Connection Utilities (for Macintosh) - Manual (Page 80)

Changing a field map
The following section describes how to change a field map when you export
information. You can also use it as an example for changing field maps when
you import or synchronize.
IMPORTANT Be careful when you change a field map. The field map you
create for each pair of applications (the Newton application and the
corresponding computer application) applies whenever you import, export, or
synchronize information between the two applications. If you make a mistake,
you might lose information.
To change a field map, follow these steps:
1 Open the Newton Connection Utilities and follow the steps to export.
For instructions, see Chapter 6, “Exporting Information From Your
Newton Device.”
The Export dialog box appears.
2 Click Advanced Options.
The Export dialog box expands.
80 Chapter 10