Apple iPod nano (5th generation) - Manual (Page 51)

Chapter 4 Watching Videos 51
To use the Apple Component AV Cable to connect iPod nano to your TV:
1 Plug the green, blue, and red video connectors into the component video
(Y, Pb, and Pr) input ports on your TV.
If you use the Apple Composite AV cable, plug the yellow video connector into the
video input port on your TV. Your TV must have RCA video and audio ports.
2 Plug the white and red audio connectors into the left and right analog audio input
ports on your TV.
3 Plug the 30-pin connector into your iPod nano or Universal Dock.
4 Plug the USB connector into your Apple USB Power Adapter or your computer to keep
your iPod nano charged.
5 Turn on iPod nano and your TV or receiver to start playing. Make sure you set TV Out
on iPod nano to On or Ask.
The ports on your TV or receiver may differ from the ports in the illustration.
To watch a video on your TV:
1 Connect iPod nano to your TV (see above).
2 Turn on your TV and set it to display from the input ports connected to iPod nano.
For more information, see the documentation that came with your TV.
3 On iPod nano, choose Videos and browse for a video.
Video to fit to your screen Set “Fit to Screen” to On. If you set “Fit to Screen” to Off, widescreen
videos display in letterbox format on iPod nano or a standard (4:3)
TV screen.
Alternate audio to play Set Alternate Audio to On.
Captions to display Set Captions to On.
Subtitles to display Set Subtitles to On.
To set Do this
USB Power
Adapter iPod Left audio (white)
30-pin connector
Television
Video in (Y, Pb, Pr)
Right audio (red)
USB
connector