Apple iPod nano (5th generation) - Manual (Page 87)

Chapter 9 Tips and Troubleshooting 87
If you want to disconnect iPod nano, but you see the message “Connected” or “Sync
in Progress”
 If iPod nano is syncing music, wait for it to complete.
 Select iPod nano in the iTunes device list and click the Eject (C) button.
 If iPod nano disappears from the device list in iTunes, but you still see the
“Connected” or “Sync in Progress” message on the iPod nano screen, disconnect
iPod nano.
 If iPod nano doesn’t disappear from the device list in iTunes, drag the iPod nano icon
from the desktop to the Trash if you’re using a Mac. If you’re using a Windows PC,
eject the device in My Computer or click the Safely Remove Hardware icon in the
system tray and select iPod nano. If you still see the “Connected” or “Sync in Progress”
message, restart your computer and eject iPod nano again.
If iPod nano isn’t playing music
 Make sure the Hold switch isn’t set to HOLD.
 Make sure the headphone connector is pushed in all the way.
 Make sure the volume is adjusted properly. A maximum volume limit might have
been set. You can change or remove it by using Settings > Volume Limit. See “Setting
the Maximum Volume Limit” on page 45.
 iPod nano might be paused. Try pressing Play/Pause (’).
 Make sure you’re using iTunes 9.0 or later (available at www.apple.com/downloads).
Songs purchased from the iTunes Store using earlier versions of iTunes won’t play on
iPod nano until you upgrade iTunes.
 If you’re using the Apple Universal Dock, make sure the iPod nano is seated firmly in
the dock and make sure all cables are connected properly.
If the internal speaker continues to play audio after you connect earphones or
headphones to iPod nano
 Disconnect and then reconnect the earphones or headphones.
If the internal speaker doesn’t start playing audio after you disconnect earphones or
headphones from iPod nano
 Any audio that’s playing pauses automatically when you disconnect earphones or
headphones from iPod nano. Press Play/Pause (’) to resume.
 The FM radio doesn’t play through the internal speaker, because iPod nano uses the
earphone or headphone cord as the radio antenna.