Apple iPod nano (5th generation) - Manual (Page 70)

70 Chapter 7 Photo Features
Viewing Slideshows
You can view a slideshow, with music and transitions if you choose, on iPod nano.
If you have an optional AV cable from Apple, you can view the slideshow on your TV.
To set slideshow settings:
m Choose Photos > Settings, and then follow these instructions:
To view a slideshow on iPod nano:
m Select any photo, album, or roll, and press Play/Pause (’). Or select any full-screen
photo and press the Center button. To pause, press Play/Pause (’). To skip to the next
or previous photo, press Next/Fast-forward (‘) or Previous/Rewind (]).
When you view a slideshow, you can use the Click Wheel to control the music volume
and adjust the brightness. You can’t use the Click Wheel to scroll through photos
during a slideshow.
If you view a slideshow of an album that includes videos, the slideshow pauses when it
reaches a video. If music is playing, it continues to play. If you play the video, the music
pauses while the video is playing, and then resumes. To play the video, press Play/Pause
(’). To resume the slideshow, press Next/Fast-Forward (‘).
To adjust the brightness during a slideshow:
1 Press the Center button until the brightness indicator appears.
2 Use the Click Wheel to adjust the brightness.
To set Do this
How long each slide is shown Choose Time Per Slide and pick a time.
The music that plays during
slideshows Choose Music and choose a playlist or Now Playing. If you’re using
iPhoto, you can choose From iPhoto to copy the iPhoto music
setting. Only the songs that you’ve added to iPod nano play.
Slides to repeat Set Repeat to On.
Slides to display in random
order Set Shuffle Photos to On.
Slides to display with
transitions Choose Transitions and choose a transition type. Random includes
all transition types except Ken Burns.
Slideshows to display on
iPod nano Set TV Out to Ask or Off.
Slideshows to display on TV Set TV Out to Ask or On.
If you set TV Out to Ask, iPod nano gives you the option of showing
slideshows on TV or on iPod nano every time you start a slideshow.
Slides to show on a PAL
or NTSC TV Set TV Signal to PAL or NTSC.
PAL and NTSC refer to TV broadcast standards. Your TV might use
either of these, depending on the region where it was purchased.
If you aren’t sure which your TV uses, check the documentation
that came with your TV.