Apple Compressor 3 - Manual (Page 113)

To replace a setting already assigned to a target with a different setting
Do one of the following:
µ
Choose Target > Change Setting. This opens the setting selection dialog where you can
choose a new setting and click Add to assign it to the selected target.
µ
Control-click the target and choose Change Setting from the shortcut menu. This opens
the setting selection dialog where you can choose a new setting and click Add to assign
it to the selected target.
µ
Select the new setting in the Settings tab and drag it to the target.
Note: With all the above methods, if you select multiple settings, only the top one is
assigned to the target.
Modifying an Assigned Setting
You can edit or change any component of a setting that has already been assigned to a
source media file in the Batch window (identified as Selected Target in the Inspector
window).
To modify a setting already assigned to a source media file in the Batch window
1 Select the target in the batch with the setting that you want to change.
The setting appears in the Inspector window with Selected Target in the Name field. This
is a temporary copy of the setting and not the setting itself, so you can make temporary
modifications to the setting for just that one batch submission.
Select a target in the
Batch window to see
its settings in the
Inspector window.
The setting’s name
appears as Selected
Target.
Click the Save As
button to save this
as a new setting with
any changes you make.
113 Chapter 8 Finalizing Jobs and Submitting Batches