Apple Compressor 3 - Manual (Page 189)

To open the Audio tab and choose audio settings
1 Click the Audio button in the MPEG-1 Encoder pane to open the Audio tab.
Select to enable
the Audio tab.
Choose the sample rate.
Select the number
of audio channels.
Choose the bit rate.
2 Select the Enabled checkbox.
3 Choose 44.1 kHz from the Sample Rate pop-up menu.
4 Select Stereo when using two-channel audio sources, or Mono when using one-channel
audio sources.
5 Choose the bit rate to use from the Bit Rate pop-up menu.
6 Click the Save button (in the lower-right corner of the Inspector) to save this setting.
Configuring the MPEG-1 File Format for DVD Use
The following sections guide you through configuring the MPEG-1 output file format for
DVD use. This process creates two settings, one for video and another for audio, creating
elementary streams.
Stage 1: Creating the MPEG-1 Video for DVD Setting
Create the setting for an MPEG-1 elementary video output file suitable for DVD. See
Creating the MPEG-1 Video for DVD Setting for more information.
Stage 2: Creating the MPEG-1 Audio for DVD Setting
Create the setting for an MPEG-1 elementary audio output file suitable for DVD. See
Creating the MPEG-1 Audio for DVD Setting for more information.
Stage 3: (Optional) Creating an “MPEG-1 for DVD” Group and Destination
Optionally, you can “package” your newly-made settings in a custom “MPEG-1 for DVD”
group and destination. See
Optional—Creating an MPEG-1 for DVD Group and Destination
for more information.
189 Chapter 17 Creating MPEG-1 Output Files