Working with effects, Working in the effects tab, Adding effects – Apple Soundtrack User Manual
Page 134: Working with, Effects

134
Chapter 8
Working with Audio Effects
Working with Effects
You can add effects to a track, bus, or output in a project and then adjust the effect
parameters to control the way in which the effects alter the sound of the track or project.
Working in the Effects Tab
The Effects tab is where you add effects and adjust effect parameters. When you click
the Effects button in the header of a track, bus, or output, the Effects tab becomes
active and displays the current effects settings for the track, bus, or output.
The upper part of the Effects tab contains lists of available effect categories. When you
click an item in the Category list, the available effects in that category appear in the
Effect list, where you can select and add them to the current effects chain.
The lower part of the Effects tab shows the effects and sends in the current effects
chain. You can show and edit effect and send parameters in the Effect Parameters area.
Adding Effects
You can add effects in the Effects tab. You can create effects chains, which are a series of
effects in a specific order. You can reorder effects in an effects chain at any time, and
hear the results immediately.
To add an effect to a track, bus, or output in the Timeline:
1
Click the Effects button in the header of the track, bus, or output in the Timeline.
2
Make a selection in the Category list to display the effects for that category in the
Effect list.
3
In the Effect list, do one of the following:
 Double-click the effect you want to add.
 Select the effect name, then click the Add Effect button.
 Drag the effect to the Effect Parameters area.
Select the effect you
want to add.
Click the Add Effect
button, double-click the
effect, or drag the effect
into the Effect Parameters
area to add it.
Select a category to
display its effects.