Apple Soundtrack - Manual (Page 44)

44 Chapter 3 The Soundtrack Interface
Meters Tab
The Meters tab displays stereo level meters that you can use to observe the volume of
the first output in a project.
 Peak indicator: Shows the highest level reached as the project plays. If the level rises
above 0 dB, the peak indicator becomes red to indicate clipping.
 Level meters: Show the output volume of the overall project as the project plays.
 Peak Value and Location display: For each channel, displays the highest (peak) value
played, and its location.
 Go to Peak buttons: Move the playhead to the channel’s peak.
 Reset button: Resets the Peak Value and Location display and the peak indicator to
their default values.
Level meters
Peak indicator Reset button
Go to Peak buttons
Peak Value and
Location display