Apple Multiple Scan 14 Display - Manual (Page 12)

3 Slide the base forward to lock it into the mounting.
Push the base forward about 1 ⁄
4
inch (.5 cm) toward the front of the monitor to
seat the base.
With the base now mounted, turn the monitor upright so that it sits on the
base.
If you should ever need to remove the base, press its release latch and then
gently pull the base toward the rear of the monitor until you can withdraw the
tabs from the mounting.
Positioning the monitor
Once your monitor is in place, either on top of your computer or next to it
on a desk or table, follow these steps:
1 Place the monitor so that the screen faces the user.
2 To slide the monitor, lift the front up slightly and push or pull in the direction you want.
3 Adjust the viewing angle of the monitor by tilting it up or down and turning it left or right
on its stand.
Position the monitor so that when you use it, no bright light is behind the
monitor or reflected on the screen. Your eyes should be about level with the
top edge of the screen and between 18 and 28 inches (45 to 70 cm) away. Take
occasional breaks when using your computer, to focus your eyes on a distant
object.
6 Chapter 1