Apple Multiple Scan 14 Display - Manual (Page 16)

5 Attach one end of the included sound output cable to the sound output port (marked
by
-
) on the back of the computer.
If you have headphones attached to the sound output port (marked by
-) on
the back of your computer, unplug them.
6 Attach the other end of the sound output cable to the sound input port (marked by
-
) on
the back of the monitor.
Connecting headphones to your monitor
If you wish, you can plug a pair of headphones (or other sound output device)
into the Apple Multiple Scan 14 Display. To plug your headphones into the
monitor, follow these steps:
1 Make sure you have connected the sound cable to your monitor and computer as
described in steps 5 and 6 in “Connecting the Monitor to Your Computer” in the previous
section.
2 Plug the headphones into the headphone port (marked by
f
) on the front of the monitor.
When headphones are plugged in, the stereo speakers are disabled, and sound
and music play through the headphones only.
Turning the monitor on
To turn on the monitor for the first time:
1 Start up your computer.
2 Press the Power button on the front right side of the monitor.
Power button Power indicator light
¤ O I
10 Chapter 1