Apple Multiple Scan 14 Display - Manual (Page 14)

Do you need an adapter connector? Some models of Macintosh computers
with built-in video and some third-party video cards require an adapter
connector to connect the monitor to the computer. You can get an adapter
connector from an Apple-authorized dealer or service provider.
Using more than one monitor
If your computer has expansion slots, you can use the Apple Multiple Scan 14
Display with one or more additional monitors connected to your computer.
You may need a video card for each additional monitor you are using. See the
manuals that came with your computer for information on working with
additional monitors.
Connecting the monitor to your computer
Follow these steps to connect the Apple Multiple Scan 14 Display to your
computer:
IMPORTANT Before you connect any cords or cables, make sure that your
computer is turned off and unplugged.
WARNING This equipment is intended to be electrically grounded. Your
monitor is equipped with a three-wire grounding plug—a plug that has
a third (grounding) pin. This plug will fit only a grounded AC outlet.
This is a safety feature. If you are unable to insert the plug into the
outlet, contact a licensed electrician to replace the outlet with a properly
grounded outlet. Do not defeat the purpose of the grounding plug!
8 Chapter 1