Apple Multiple Scan 14 Display - Manual (Page 42)

User controls
m Power-on switch
m Automatic degauss at power-up; manual degauss by turning power switch
off, then on (capable of full degauss after monitor is turned off for 20
minutes or more)
m Controls: Brightness, Contrast, Horizontal shift, Vertical shift, Horizontal
size, Vertical size
Active video image area
m Adjusted at the factory for the following standard modes:
Mode Resolution Vertical refresh rate Horizontal scan rate
(hertz) (kilohertz)
VGA 640 x 480 60 31.5
Macintosh 640 x 480 66.67 35.0
SVGA 800 x 600 60 37.9
Macintosh 832 x 624 75 49.7
Note: Do not choose the 800 x 600, 72-Hz setting. It has not been optimized for this display.
Input electrical requirements
m Voltage
90–132 volts (V), 198–264 V
m Frequency
47–63 hertz (Hz)
m Power
75 watts (W) maximum
36 Appendix