Synergy 8020-20/8040-20 - Jeep JK 2 - Manual (Page 12)

IMG 14.2 Red arrows indicate section to clearance for easier installation of upper shock nut.
32) Install the lower part of the shock into the mount. Re-use the factory bolt / nut and torque to 56 ft-lbs.
33) Install the factory rear sway bar links to the front of the vehicle. Install in the same orientation as the
factory front sway bar links were installed. Use the sway bar link bolt / nut removed in step 23 for
attachment at the axle. Torque to 75 ft-lbs. Install the upper nut to 66 ft-lbs.
 Completed sway bar link installation should appear as pictured below.