Synergy 8020-20/8040-20 - Jeep JK 2 - Manual (Page 7)

14) Set the tie rod end joint to neutral and tighten tie rod end jam nut. Use two ¾” wrenches and snug jam
nut against tie rod end.
15) Install 8084 rear brake line relocation bracket as pictured below. Note the brackets are left and right
specific and should jog in as pictured. The notch in the 808401 relocation bracket should be towards the
back of the vehicle.
 Attach bracket to frame using the factory bolt. Torque to 10 ft-lbs.
 Bolt the factory brake line to the relocation bracket using the ¼-20 UNC bolts provided
with the kit.