Synergy 8020-20/8040-20 - Jeep JK 2 User Manual
Page 3
Advertising
4) Remove the frame attachment bolt for the brake line. This is bolt #2 in the image below, use a 10 mm
socket / wrench. Retain this bolt as it will be re-used.
5) With brake lines loosened, support the axle and remove the shocks. **Note** the shocks are keeping
the suspension from fully drooping out. Once shocks are removed, the axle can be lowered to the point
of coil removal.
Remove the two upper shock bolts using a 15mm socket / wrench (#1 in IMG 5.1 below)
Remove the lower nut and bolt using an 18mm socket / wrench (#2 in IMG 5.2 below)
Advertising