Synergy 8024-30/8024-40 - JK Synergy Stage 4 Long Arm System User Manual
Page 21
Advertising
f) Reinstall the control arm bracket to the body mount studs and tighten the body
mount nuts to 40 ft-lbs
g) Install the ½” bolts with washers in the control arm bracket into the nut tabs.
Tighten the control arm bracket bolts to 90 ft-lbs.
h) Trim the large washer under the body mount bolt to clear the upper control arm
joint. Install the large body mount bolt and torque to 80 ft-lbs
Advertising
This manual is related to the following products: