Eppendorf epMotion 96 - Manual (Page 43)

43
Operation
epMotion ® 96
English (EN)
6.10 Mode Pipette and Mix – Dispensing and mixing liquid
Aspirating liquid in one step, dispensing liquid in one step and mixing liquid automatically.
Abb. 6-3: Mode Pipette and Mix
Fig. 6-3: Mode Pipette and Mix
6.10.1 Aspirating liquid
Prerequisites
• Source vessel is available.
1. Put the destination vessel onto the lifting table and move the lifting table into working position.
2. Set the aspiration volumes and the speed levels.
3. Press Aspirate .
Parameter Value Range of values
Speed aspirate Set the speed of the liquid aspiration. 1 – 9
Speed dispense Set the speed of the liquid dispensing. 1 – 9
Volume Set the aspiration volume in μL. 0.5 – 300 (increment of 0.1)
Mix Set the mixing volume in μL. 0.5 – 300 (increment of 0.1)
Cycles Set the number of mixing cycles. 1 – 99