Eppendorf epMotion 96 - Manual (Page 45)

45
Operation
epMotion ® 96
English (EN)
6.11.1 Aspirating liquid
Prerequisites
• Source vessel is available.
1. Put the source vessel onto the lifting table and move the lifting table into working position.
2. Set the aspiration volumes and the speed levels.
3. Keep the Aspirate key pressed.
Liquid is aspirated until the Aspirate key is released or the set aspiration volume is reached.
6.11.2 Dispensing liquid
Prerequisites
• Liquid has been aspirated.
• Destination vessel is available.
1. Put the destination vessel onto the lifting table and move the lifting table into working position.
2. Keep the Dispense key pressed.
Liquid is dispensed until the Dispense key is released or the liquid volume is exhausted.