Eppendorf epMotion 96 - Manual (Page 51)

51
Operation
epMotion ® 96
English (EN)
6.14.3 Editing the program sequence – Inserting a mode
6.14.4 Editing the program sequence – Changing the parameters of a mode
1. Select a mode and keep the selected entry pressed.
The parameter view of the mode is displayed.
2. Change the parameters.
3. To change the parameters of the previous or the next mode, press Previous or Next .
4. Tap on the back button to return to the program list view.
5. Press Save .
The program sequence is stored.
1. Select the mode ahead of which the new mode
shall be inserted.
2. Press Insert .
3. Select a mode and confirm with Select .
4. Choose the parameters for the selected mode and
confirm with back .
5. Press Save .
The program sequence is stored.