Brother PE-DESIGN V7 - Manual (Page 125)

119
Arranging Embroidery Designs (Layout & Editing)
2.
Click in the Arc shape selector, and then click
Arc.
3.
Proceed as you would to draw a circle or an
oval.
→ A radial line appears on the oval when the
mouse button is released.
4.
Move the pointer to the start point of the arc,
and then click.
→ The radial line disappears.
5.
Move the pointer until the arc has the desired
shape, and then click.
Drawing a fan shape
1.
Click on the Tool Box.
→ The shape of the pointer changes to
, and the Sewing Attributes bar
appears similar to the one shown below.
2.
Click in the Arc shape selector, and then click
Fan Shape.
3.
Proceed as you would to draw a circle or an
oval.
→ A radial line appears on the oval when the
mouse button is released.
4.
Move the pointer to the start point of the fan
shape, and then click.
→ The radial line disappears.
5.
Move the pointer until the fan has the desired
shape, and then click.
b
Memo:
• You can change the color and sew type
either before or after drawing the shape. For
more details on changing these settings,
refer to “Color” on page 149 and “Sew type”
on page 150.
• You can also use the settings in the Sewing
Attribute Setting dialog box to define other
attributes of the shape. (For more details,
refer to “Specifying sewing attributes” on
page 151.) If you do not change these
settings at this time, the current settings will
be applied, however you can modify them
later.
Click at start point.
Move to end point.
Click at end point.
b
Memo:
• You can change the color and sew type
either before or after drawing the shape. For
more details on changing these settings,
refer to “Color” on page 149 and “Sew type”
on page 150.
• You can also use the settings in the Sewing
Attribute Setting dialog box to define other
attributes of the shape. (For more details,
refer to “Specifying sewing attributes” on
page 151.) If you do not change these
settings at this time, the current settings will
be applied, however you can modify them
later.