Brother PE-DESIGN V7 - Manual (Page 79)

73
Tutorial
Click Sew, then Applique Wizard menu.
Under Applique Material, select whether
(Yes) or not (No) the outline of the appliqué is
to be sewn onto the appliqué fabric as a guide
for cutting it out.
The Applique Position, (guideline for
attaching the appliqué piece) is set to be sewn
automatically.
Under Tack down, select whether (Yes) or
not (No) the appliqué is to be basted onto the
base fabric. If Yes is selected, select the
basting stitch from the selector. You can also
select which stitch (satin stitch, E stitch or V
stitch) to use for the basting.
Under Covering Stitch, select the sew type
and other attributes for finishing the appliqué.
Click OK to finish the Applique Wizard and
display the design in the Design Page.
→ The generated appliqué pattern is
displayed on the Design Page of Layout &
Editing.
E stitch V stitch Satin stitch