Tutorial (advanced) – Brother PE-DESIGN V7 User Manual
Page 310
Advertising
304
Tutorial (Advanced)
Draw the curve shown in the illustration
above.
Click
(Manual Punch tool).
Click
(Running-type pattern button),or
use shortcut “v” on your keyboard.
Draw the curve shown in the illustration
above.
Click
(Manual Punch tool).
Click
(Curved Block type),or use
shortcut “x” on your keyboard.
As shown in the figure above, click on the
Design Page and draw a “g”. Double-click at
the end.
Drag SetLine to adjust the character width.
27
29
28
30
31
32
33
34
b
Memo:
By drawing a line as a running-type punching
pattern along the center of the blocks, cleaner
stitching can be sewn.
44 45
43
41
39
37
35
36
40
42
38
Advertising
This manual is related to the following products: