Brother PE-DESIGN V7 - Manual (Page 232)

226
Manually Creating Embroidery Patterns From Images (Design Center)
Saving frequently used
sewing attributes
Frequently used sewing attributes can be saved
together, and recalled when specifying sewing
attributes.
■
Saving the settings in a list
1.
If necessary, change the settings in the
Sewing Attribute Setting dialog box, and
then click .
→ The Load/Save Default Settings dialog
box appears.
2.
Click Save as.
→ The Save As dialog box appears.
3.
Type in a name for the group of settings, and
then click OK to register the group in a list.
■
Deleting a group of settings from
the list
1.
In the Load/Save Default Settings dialog
box, select the group of settings to be deleted.
2.
Click Delete to delete the selected group of
settings from the list.
■
Recalling a group of settings from
the list
1.
In the Load/Save Default Settings dialog
box, select the group of settings to be recalled.
2.
Click Load.
→ The Load/Save Default Settings dialog
box closes, and the settings in the
Sewing Attribute Setting dialog box
change to the saved settings.
b
Memo:
Settings in both Beginner mode and Expert
mode can be saved.
b
Memo:
If the name for the settings entered in the
Save As dialog box is already registered, the
following message appears.
• To overwrite the previously registered
settings, click OK.
• If you do not want to overwrite the
existing settings, click Cancel, and
then type in a different name for the
settings.
b
Memo:
(default) cannot be deleted.
b
Memo:
Only one group of settings can be selected.
b
Memo:
To change the saved settings and save the
changes, change the settings in the Sewing
Attribute Setting dialog box, click ,
then Save as, and then click OK without
changing the group name for the settings.
b
Memo:
The edited user thread chart can also be used
on a different computer. Simply copy
sastu.txt from the Settings folder in the PE-
DESIGN Ver7 folder (application folder) on
the original computer to the Settings folder at
the same path on the destination computer.