Eppendorf Mastercycler pro - Manual (Page 62)

System management
Mastercycler pro
English (EN)
62
8.5.2 Exporting and importing programs
Backup Back up user nodes, folders and programs onto an external storage medium.
• MMC : The MMC inserted will automatically be completely deleted at the start of
the backup process.
• USB : Any files and folders in the directory \eppendorf will be deleted automatically
at the start of the backup process.
The backed-up data can be copied into the control panel using the Restore function.
Restore Administrator only: copy the user nodes, folders and programs saved on the external
storage medium during a backup to the control panel.
This process deletes any user nodes, folders and programs which already exist in the
control panel. After the restore process, only the data copied from the external storage
medium will be available.
Export
1. In the navigation tree, mark the program.
2. Insert an MMC or a USB storage medium into the slot on the right-hand side of the
control panel.
3. Press the Export .
The program is copied to the MMC or the USB storage medium.
The exported programs can be transferred to a different control panel.
Importing
programs and
folders
1. Insert an MMC or a USB storage medium into the slot on the right-hand side of the
control panel.
2. Open the node MMC or USB and mark the folder or program you would like to
import.
3. Press the function key Copy .
4. Mark the user node or folder in the destination and press the function key Paste .