Eppendorf Combitips advanced - Manual (Page 15)

Operation
Combitips advanced ®
English (EN)
15
4.3 Inserting the Combitip
4.4 Dispense liquid
Additional information can be found in the operating manual of your dispenser.
NOTICE! Device damage due to incorrect handling of the inserted Combitip
 Insert the Combitip straight into the dispenser from below.
 Do not rotate the inserted Combitip.
 Never grip the dispenser using the Combitip.
The Combitip is easier to insert if the ejector is held pressed down during insertion.
1. If the Combitip piston has been pushed out, push
it back into the cylinder of the Combitip.
2. Use force to push the Combitip into the opening
on the lower side of the dispenser until the
Combitip engages .
The liquid dispensing angle should always be as steep as possible. A dispensing angle greater
than 45° can result in an incorrect dispensing volume during the final dispensing steps.
1 2
1
2