JLG 660SJ Operator Manual - Manual (Page 112)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-26 – JLG Lift – 3121297
13. If lockout cylinders do not function properly, have quali-
fied personnel correct the malfunction prior to any fur-
ther operation.
6.6 PROPANE FUEL FILTER REPLACEMENT
Removal
1. Relieve the propane fuel system pressure. Refer to Pro-
pane Fuel System Pressure Relief.
2. Disconnect the negative battery cable.
3. Slowly loosen the Filter housing and remove it.
4. Pull the filter housing from the Electric lock off assembly.
5. Remove the filter from the housing.
6. Locate Filter magnet and remove it.
7. Remove and discard the housing seal.
1. Electric Lock Off Solenoid
2. Housing Seal
3. Filter Magnet
4. Filter Housing
5. Electrical Connector 6. Fuel Outlet
7. O-ring
8. Filter
9. Fuel Inlet
10. Ring
Figure 6-7. Filter Lock Assembly