JLG 660SJ Operator Manual - Manual (Page 71)

SECTION 4 - MACHINE OPERATION
3121297 – JLG Lift – 4-17
4.14 TIE DOWN AND LIFTING
When transporting machine, boom must be in the stowed
mode with turntable lock pin engaged and machine securely
tied down to truck or trailer deck. Four tie down eyes are pro-
vided in the frame slab, one at each corner of the machine.
(See Figure 4-3. Machine Tie Down.)
If it becomes necessary to lift the machine using an over-
head or mobile crane, it is very important that the lifting
devices are attached only to the designated lifting eyes, and
that the turntable lock pin is engaged. (See Figure 4-4. Lifting
Chart.)
NOTE: If not equipped, front lifting eyes on the S Models
machines are available.
NOTE: Lifting eyes are provided at the front and rear in the frame
slab. Each of the four chains or slings used for lifting
machine must be adjusted individually so machine
remains level when elevated.
SECURE TURNTABLE WITH TURNTABLE LOCK BEFORE TRAVELING
LONG DISTANCES OR HAULING MACHINE ON TRUCK/TRAILER.