JLG 3248RS/10RS Service Manual - Manual (Page 126)

SECTION 6 - DIAGNOSTIC TROUBLE CODES
6-16 – JLG Lift – 3121273
9958 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
9960 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
9962 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
9963 POWER MODULE FAILURE -
INTERNAL ERROR The System Module detected a mis-
match in the redundant RAM informa-
tion stored in the power PCB. • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - ON
9964 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
9969 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
9970 POWER MODULE FAILURE -
INTERNAL ERROR The System Module detected a mis-
match in the redundant RAM informa-
tion stored in the interface PCB. • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - ON
9971 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
99143 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
99144 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
99145 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
99146 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
99147 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
99148 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
99149 POWER MODULE FAILURE -
INTERNAL ERROR • Cycle machine, if error still exists, replace System Module.
• HEALTH (Status LED) - FLASHING
9-9 Hardware
DTC FAULT MESSAGE DESCRIPTION CHECK