JLG 450AJ ANSI Operator Manual - Manual (Page 24)

SECTION 2 - PREPARATION AND INSPECTION
2-8 – JLG Lift – 3120748
Figure 2-4. Daily Walk-Around Inspection - Sheet 3 of 3
23. Turntable Bearing - No loose or missing hardware;
no visible; evidence of proper lubrication; no evi-
dence of loose bolts or looseness between bearing
or structure.
24. Swing Motor and Worm Gear - No loose or missing
hardware; no visible damage; evidence of proper
lubrication.
25. Muffler and Exhaust System - Properly secured, no
evidence of leakage.
26. Auxiliary Power Pump - No loose or missing parts, no
evidence of leakage, no damaged wires.
27. Hydraulic Pump - No loose or missing parts, no evi-
dence of leakage.
28. Wheel/Tire Assembly, Left Rear - Properly secured,
no loose or missing lug nuts, no visible damage.
29. Rotator Cylinders - No visible damage; cylinder pins
secure; hydraulic hoses undamaged and not leak-
ing.
30. Platform Gate - Latch, stop, and hinges in working
condition and properly secured; no loose or missing
parts.